It is now all set up but still has issues connecting to my home network while. During an online chat session, I was told our old iFit WiFi module will fit in the new. I have a treadmill with an iFit module that tracks my workouts. I have had this program for over a year and recently cannot connect wirelessly to my internet. I checked with the ICON personnel (who run my iFit program) and checked their online forum and with tech support. This is what they suggest I ask my ISP (Cox Communications).
![]()
The WiFi module adds a wireless connection to the Internet to compatible equipment that does not have that feature built it.Your WiFi module needs to be configured one time to connect to your router and to log on to our server. The configuration program is loaded on your computer and you cable your module to your computer to configure it. If you need to download the configuration program.Launch the configuration program. If you are having trouble with the configuration program click.Enter the iFit.com username and password you used when you registered at iFit.com.
Upper and lowercase letters are used explicitly. If you used upper case in your username and/or password you must also do that here. If you are not successful in logging on, use your computer browser to check your credentials or use the forgot prompts provided. If you haven't yet registered do it now by.After successfully logging in, the configuration program will write the firmware files to your module. If your equipment does not have the latest firmware, your module will update it once you plug it in.If you have setup before click the button 'CHANGE SETTINGS'. If this is the first time you will see then next picture.Select the name of your router from the list. If you don't see your router name, click here.
Choose your password type, then enter your router password. If you don't know your password click here. To find out about password types.The configuration program will test the setup. If you have a failure click here.Now that your module is configured and the tests pass you can plug the module into your equipment.
![]()
You will not need to configure the module again unless you change your router or passwords. The console features a tablet computer with a full-color touch screen. The following information will help you become familiar with the tablet’s advanced technology:. The console functions similarly to other tablet computer s. You can slide or flick your finger against the screen to move certain images on the screen, such as the displays in a workout ( see ).
However, you cannot zoom in and out by sliding your fingers on the screen. The screen is not pressure sensitive. You do not need to press hard on the screen. To type information into a text box, touch the text box to view the keyboard.
To use numbers or other characters on the keyboard, touch the?123 button. To view more characters, touch the Alt button. Touch the Alt button again to return to the number keyboard. To return to the letter keyboard, touch the ABC button.
To use a capital character, touch the button with an upward-facing arrow. To use multiple capital characters, touch the arrow button again. To return to the lowercase keyboard, touch the arrow button a third time. To clear the last character, touch the button with a backward-facing arrow and an X.
Use the buttons on the console shown below to navigate the tablet. Note: Your console buttons may look different from the buttons shown below.Press the Back button to return to the previous screen. Press the Home button to return to the main menu. Note: The center button does not function. 1 Insert the key into the consoleSee HOW TO TURN ON THE POWER in the user’s manual.
Note: It may take a minute for the console to be ready for use.2 Select the main menuWhen you turn on the power, the main menu will appear after the console boots up. At any time that the screen is not showing the main menu, touch the home button in the lower-left corner of the screen to return to the main menu.3 Start the walking belt and adjust the speedTouch the Start button on the screen or press the Start button on the console to start the walking belt. You can also press the Manual button on the console, and then touch the Resume button on the screen. The walking belt will begin to move at 1 mph. As you exercise, change the speed of the walking belt as desired by pressing the Speed increase and decrease buttons.
Each time you press one of the buttons, the speed setting will change by 0.1 mph; if you hold down the button, the speed setting will change in increments of 0.5 mph.To stop the walking belt, press the Stop button. To restart the walking belt, press the Start button.4 Change the incline of the treadmill as desiredTo change the incline of the treadmill, press the incline increase and decrease buttons or one of the numbered incline buttons. Each time you press one of the buttons, the incline will gradually change until it reaches the selected incline setting.Note: The first time you adjust the incline, you must first calibrate the incline system (see HOW TO USE THE MAINTENANCE MODE).5 Monitor your progressThe console offers several display modes. The display mode that you select will determine which workout information is shown. To select the desired display mode, simply flick or slide the screen. You can also view additional information by touching the red boxes on the screen. If desired, adjust the volume by pressing the volume increase and decrease buttons on the console.
Note: The volume buttons may look different from those shown.To pause the workout, touch one of the menu buttons or press the Stop button on the console. To continue the workout, touch the Resume button or the Start button.
To end the workout session, touch the End Workout button.6 Measure your heart rate if desiredIMPORTANT: If your fitness equipment includes a chest heart rate monitor, do not use the handgrip heart rate monitor and the chest heart rate monitor at the same time, or the console will not display your heart rate accurately. For information about the chest heart rate monitor, see the user’s manual.Before using the handgrip heart rate monitor, remove the sheets of plastic from the metal contacts.
In addition, make sure that your hands are clean. To locate the metal contacts, see the section titled BEFORE YOU BEGIN in the user’s manual.To measure your heart rate, stand on the foot rails and hold the contacts with your palms for approximately ten seconds; avoid moving your hands. When your pulse is detected, your heart rate will be shown. For the most accurate heart rate reading, continue to hold the contacts for about 15 seconds.7 Turn on the fan if desiredNote: Your fitness equipment may not feature a built-in fan.The fan features multiple speed settings and may feature an auto mode. When the auto mode is selected, the speed of the fan will automatically increase and decrease as the speed of the walking belt increases and decreases.If your fan buttons look like this,press the Manual fan button repeatedly to select a fan speed or to turn off the fan.
Press the Auto fan button to select the auto mode or to turn off the fan.If your fan buttons look like this,p ress the fan increase button to increase the fan speed. Note: If you press the fan increase button once while the fan is on its maximum speed setting, the auto fan mode will be selected. Press the fan decrease button repeatedly to decrease the fan speed o r to turn off the fan.8 When you are finished exercising, remove the key from the consoleStep onto the walking platform and touch the home button or the back button on the screen or press the Stop button on the console.
A workout summary will appear on the screen. After you view the workout summary, touch the Finish button to return to the main menu. You may also be able to either save or publish your results using one of the options on the screen. Then, remove the key from the console and put it in a secure place.When you are finished using the fitn e ss equipment, press the power switch into the off position and unplug the power cord. IMPORTANT: If you do not do this, the fitness equipment’s electrical components may wear prematurely.
Select the settings main menu.Touch the gears button near the lower right corner of the screen to select the settings main menu.2. Select the wireless network mode.In the settings main menu, touch the Wireless Network button to enter the wireless network mode.3. Enable Wi-Fi.Make sure that the Wi-Fi checkbox is marked with a green checkmark. If it is not, touch the Wi-Fi menu option once and wait for a few seconds. The console will search for available wireless networks.4.
Set up and manage a wireless network connection.When Wi-Fi is enabled, the screen will show a list of available networks. Note: It may take several seconds for the list of wireless networks to appear.Make sure that the checkbox on the Network notification menu option is marked with a green checkmark to have the console notify you when a wireless network is within range and available.When a list of networks appears, touch the desired network. Note: You will need to know your network name (SSID). If your network has a password, you will also need to know the password.An information box will ask if you want to connect to the wireless network. Touch the Connect button to connect to the network or touch the Cancel button to return to the list of networks. If the network has a password, touch the password entry box. A keyboard will appear on the screen.
To view the password as you type it, touch the Show Password checkbox.To use the keyboard, see in the 7' or 10' Tablet Computer Console instructions.When the console is connected to your wireless network, the WiFi menu option at the top of the screen will display the word CONNECTED. Then, press the back button on the console to return to the wireless network mode.To disconnect from a wireless network, select the wireless network and then touch the Forget button.If you are having problems connecting to an encrypted network, make sure that your password is correct. Note: Passwords are case-sensitive.Note: The iFit Live mode supports unsecured and secured (WEP, WPA, and WPA2) authentication protocols. A broadband connection is recommended; performance depends on connection speed.Choose the Login button from the main screen. Type in the username and password you used when you registered at iFit.com. If you haven't registered yetNow download a trainer workout to associate your fitness equipment to your account.
Touch the Lose Weight button on the main screen.Then, start your workout from the list.
Copyright ©2020Leaf Group Ltd.Use of this web site constitutes acceptance of the LIVESTRONG.COM,and.The material appearing on LIVESTRONG.COM is for educational use only. It should not beused as a substitute for professional medical advice,diagnosis or treatment. LIVESTRONG is a registered trademark of the LIVESTRONG Foundation.The LIVESTRONG Foundation and LIVESTRONG.COM do not endorseany of the products or services that are advertised on the web site.Moreover, we do not select every advertiser or advertisement that appears on the web site-many of theadvertisements are served by third party advertising companies.
![]() Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
March 2023
Categories |